Kinedyne Attaching Pin to Attach Beam Head Assemblies to Beams

Attaching Pin to Attach Beam Head Assemblies to Beams

Product Code:

1866-2

UPC Code:

52474001724

Have Questions?

Fill out the form below

Detail

When assembling your beam, you'll need Kinedyne's Steel Beam Attaching Pin to Attach Beam Head Assemblies to Beams.

Steel Beam Attaching Pin to Attach Beam Head Assemblies to Beams

Need to replace your Beam Head Assembly to your Logistic Beam but realize that that one crucial part has run off somewhere with the dish and the spoon? It never hurts to have a spare Steel Beam Attaching Pin so that you have a backup to help you attach your Beam Head Assembly to your Beam. Easy and quick to use, you'll have your Beam ready in no time with this handy Pin.

Attaching Pin to Attach Beam Head Assemblies to Beams – 1866-2 Quick Specs:

Type of Product: Replacement Attaching Pin to Attach Beam Head Assemblies to Beams
Includes: Attaching Pin
Weight: 0.1 Lbs. / 0.05 Kgs.

Specifications

Country of Origin:	China
Finish:	Zinc Plated
Color:	Gold Dichromate
PROPOSITION 65:	No
Includes:	Attaching Pin
Material:	Hardened Steel
Shipping Days:	3-5
Type of product:	Replacement Attaching pin to attach Beam Head Assemblies to beams
Weight (kgs):	0.04
UPC Code:	52474001724
Weight (lbs):	0.1
Used with (Type of Logistic Beam):	1866

Packaging

Skid - GTIN:	20052474001728
Skid - Standard Pack Quantity:	N/A
Skid - Unit Quantity:	N/A
Standard Pack - GTIN:	10052474001721
Standard Pack - Unit Quantity:	25
Unit Packaging:	Individually

Notices & Warnings

Warning English:	SERIES E & A BEAMS - WARNING: Series E or A beams are designed for use with Kinedyne Logistic Track. Load ratings may be reduced when used with other tracks or if the track fitting is not positively engaged. Your cargo control system is only as strong as its weakest link. Do not overload beams or create a top-heavy, unstable trailer. Do not exceed statedWorking Load Limits of Beams. Dynamic loads must be considered to avoid possible overload of system. Actual pallet load supported by the beams in a decking application must not exceed 50% of the statedWorking Load Limit to allow for dynamic loads during transit.
Warning French:	POUTRELLES DE SÉRIE E ET A - AVERTISSEMENT: Poutrelles de Série E etA sont conçus pour être utilisés avec les rails Logistique de Kinedyne. La capacité de charge peut être réduite lorsque ces raccords sont utilisés avec d’autres rails ou lorsque le raccord n’est complètement verrouillé. Votre système d’arrimage est aussi fort que son maillon le plus faible.Ne pas surcharger pas les poutrelles, ne pas mettre trop de poids en hauteur, ce qui pourrait élever le centre de gravité et rendre la remorque instable. Ne pas dépasser la capacité de charge maximale des poutrelles. Les cargaisons dynamiques doivent être considérés pour éviter le surchargement du système. Le chargement actuel des palettes supporté par les poutrelles dans une application d'empilage de peuvent pas dépasser 50% de la charge maximale de la poutrelle pour permettre les cargaisons dynamiques en route.
Warning Spanish:	ADVERTENCIA: Barras Serie E yA están diseñados para utilizarse específicamente con el riel logístico de Kinedyne. Los índices de carga pueden reducirse al utilizar otros rieles o bien, si los accesorios de los rieles no están correctamente enganchados. Considere que su sistema de control de carga es tan fuerte solo como su eslabón más débil. Las barras no deben sobrecargarse, ya que el exceso de peso en la parte superior causa la inestabilidad del remolque.No exceda la carga límite de trabajo establecida de las barras. Se deben considerar cargas dinámicas para evitar la posible sobrecarga del sistema. Carga de paleta real apoyada por las barras en una aplicación de plataforma no debe exceder el 50% de la Carga Límite de Trabajo establecida para permitir cargas dinámicas durante el tránsito.

Click on thumbnails to compare, click and drag images to reorder

Attaching Pin to Attach Beam Head Assemblies to Beams

Fill out the form below

Steel Beam Attaching Pin to Attach Beam Head Assemblies to Beams

Attaching Pin to Attach Beam Head Assemblies to Beams – 1866-2 Quick Specs: