2" by 30' Wire Hook Ratchet Strap

2-Inch x 30-Foot Wire Hook Ratchet Strap

For truckers looking for the right strap that stays tight before, during, and after each use, our 2" x 30' Wire Hook Ratchet Strap is sure to see the job through time and time again. Our Ratchet Strap was designed and engineered under direct Kinedyne control to handle nearly any flatbed tie down job, heavy duty or light, commercial or non-commercial. This assembly has a working load limit of 3,335 Lbs. / 1,513 Kgs.

If your application involves small attachment points, our Kinedyne 1006 Heavy Duty Narrow Hooks can slip right in, securing your load and staying that way until delivery. Kinedyne knows that many truckers are familiar with the tragedy of losing vital cargo due to inadequate straps that keep loosening during long hauls, causing both financial and physical damages, often leading to some serious injuries. Our straps are engineered to help prevent such a loss.

The strap's durability comes from its polyester webbing, designed not only to complement but also enhance the ratchet's hardware. The premium polyester remains tight even after several uses. This Wire Hook Ratchet Strap has an 18'' fixed end as standard and has a working load limit of 3,335 Lbs. / 1,513 Kgs.

All Kinedyne Ratchet Straps are labeled to meet WSTDA, CVSA, CHP, DOT regulations, and North American Cargo Securement standards and are stenciled with our name and logo and working load limit on the straps and the tags.

2" by 30' Wire Hook Ratchet Strap – 513084 Quick Specs:

• Working Load Limit: 3,335 Lbs. / 1,513 Kgs.
• Width: 2 Inches
• Length: 30 Feet
• Weight: 5.8 Lbs. / 2.6 Kgs.
• Webbing: Standard Kinedyne Gold with Black Edge 2084F Webbing
• Fixed End Length: 18 Inches
• Type of Tension Device: Kinedyne 804 Wide Handle Ratchet
• End Fitting: Kinedyne 1006 Heavy Duty Narrow Hook