Kinedyne 4" x 40' Delta Ring Winch Strap

4" by 40' Delta Ring Winch Strap

Product Code:

424010

UPC Code:

52474005371

Have Questions?

Fill out the form below

The Kinedyne 4" x 40' Delta Ring Winch Strap is equipped to handle your heavy-duty and or oversized loads. With a working load limit of 5,400 Lbs. / 2,450 Kgs., the Delta Ring Winch Strap is the ideal solution to your cargo control.

4-Inch x 40-Foot Delta Ring Winch Strap

Our 4-inch x 40-foot Delta Ring Winch Strap is for those who are looking to go beyond the industry standard of length. If you need extra securement, then you need 40 feet of our industrial strength wear-resistant polyester webbing.

Manufactured under our direct quality control, the standard Kinedyne gold with black edge 4084F webbing is strong enough to handle a working load limit of 5,400 Lbs. / 2,450 Kgs. Resistant against, ultraviolet light, and moisture, our Delta Ring Winch Strap offers a reliable tie down that can help you control multiple types of load securements, whether its tires, wood, equipment, etc. for your commercial or personal project.

Helping you secure and transport your cargo in a secure and quick manner is the Kinedyne 1026 Delta Ring end fittings. This gold dichromate heat-treated carbon steel ring can slip into nearly any hook on your flatbed or other vehicle for proper securement. Our Delta Ring is also coated in a zinc plated finish to protect it from corrosion, so it'll stay strong and reliable.

All Winch Straps meet WSTDA, CVSA, CHP, North American Cargo Securement standards, and DOT regulations and have the Kinedyne name and the working load limit labeled on the tags and straps. The Capacity Indicator Line designates that one red line represents 5,000 pounds per inch across webbing.

4" by 40' Delta Ring Winch Strap – 424010 Quick Specs:

Working Load Limit: 5,400 Lbs. / 2,450 Kgs.
Width: 4 Inches
Length: 40 Feet
Weight: 6.28 Lbs. / 2.8 Kgs.
Webbing: Standard Kinedyne Gold with Black Edge 4084F Webbing
End Fitting: Kinedyne 1026 Delta Ring

Specifications

Breaking Strength - Assembly (lbs):	16200
End Fitting Material:	Heat Treated Carbon Steel
Breaking Strength - End Fittings (kgs):	9076
Breaking Strength - End Fittings (lbs):	20010
End Fitting Finish:	Zinc Plated
Country of Origin:	Canada/USA
Family:	Kinedyne Gold with Black Edge
Breaking Strength - Webbing (kgs):	9072
Breaking Strength - Webbing (lbs):	20000
Breaking Strength - Assembly (kgs):	7348
End Fitting Color:	Gold Dicromate
Color:	Kinedyne Gold with Black Edges
PROPOSITION 65:	No
Rating Tag:	Tyvek Tag marked with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations
Kinedyne K-Force Abrasion Coating:	False
Kinedyne Rhino Abrasion Coating:	False
Length (feet):	40
Specification Met:	WSTDA (web sling tie down association)
Sew Pattern:	Engineered to match webbing and hardware
Shipping Days:	3-5
VMRS Cargo Restraints:	055-012-014
Note for Breaking Strength (added as a warning 1):	notes-all-winch-strap-assembly-rating
Note for Breaking Strength (added as a warning 2):	notes-all-winch-strap-assembly-rating
Note for Breaking Strength (added as a warning 3):	notes-all-winch-strap-assembly-rating
Type of End Fitting:	Kinedyne 1026 Delta Ring
Warning Tag:	Trilingual (English, French and Spanish)
Webbing:	Kinedyne Gold with Black Edge 4080F Webbing
Webbing Material:	Polyester
Working Load Limit - Assembly (kgs):	2449
Webbing Strength (WSTDA) Indicator Line:	WSTDA (web sling tie down association) Capacity Indicator Line - 1 red line which represents 5000 Lbs. per inch across webbing
Working Load Limit - Assembly (lbs):	5400
Working Load Limit - End Fittings (kgs):	3025
Working Load Limit - End Fittings (lbs):	6670
Weight (kgs):	3
UPC Code:	52474005371
Weight (lbs):	6.2
Stencil Working Load Limit:	Stenciled with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations, every 30 inches
Working Load Limit - Webbing (kgs):	2994
Working Load Limit - Webbing (lbs):	6600
Width (inches):	4

Packaging

Skid - GTIN:	20052474005375
Skid - Standard Pack Quantity:	30
Skid - Unit Quantity:	300
Standard Pack - GTIN:	10052474005378
Standard Pack - Unit Quantity:	10
Unit Packaging:	Individually rolled and banded

Notices & Warnings

Warning English:	WARNING: Only trained, knowledgeable personnel should use tie-down straps. It is the operator’s responsibility to use appropriate type and number of straps for the load being secured. Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in a temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C). Straps should be stored out of direct sun and away from damaging chemicals when not in use. Ensure load is stable before tightening or releasing tension in a strap assembly.
Warning French:	AVERTISSEMENT : Seulement un personnel qualifié et instruit devrait se servir des courroies d’arrimage. Il est de la responsabilité de l’opérateur d’assurer l’utilisation du bon nombre et genre de courroie d’arrimage pour le type de cargaison étant sécurisée. Les courroies et sangles doivent être protégées lorsqu’elles sont utilisées sur des objets abrasifs ou coupants. Les courroies coupées, usées ou endommagées ne doivent pas être utilisées et doivent être remplacées immédiatement. Tout ensemble de courroie doit être inspecté avant chaque utilisation. L’utilisation d’une rallonge ou autre moyen d’accroître l’effet de levier d’une poignée à boucle à cliquet ou d’un treuil, autre qu’un outil approuvé par Kinedyne, peut causer des blessures graves à l’utilisateur ou un passant. Les courroies tissées sont calibrées pour des températures allant de + 194 degrés F (+90°C) à -40 degrés F (-40°C). Les sangles devraient être rangée hors du soleil et loin des produits chimiques nuisibles lorsqu’elles ne sont pas en utilisation.Assurez-vous que la cargaison est stable avant d’arrimer ou de relâcher la tension d’une courroie d’arrimage.
Warning Spanish:	ADVERTENCIA: Solo el personal entrenado y bien informado debe usar correas de amarre. Es responsabilidad del operador utilizar un tipo y numero de correas apropiados para la carga que se asegura. Las correas deben protegerse cuando se utilizan sobre objetos ásperos o cortantes. Las correas cortadas, desgastadas o dañadas no deben ser utilizadas y deben sustituirse inmediatamente.Todos los ensambles de correa deben inspeccionarse antes de ser utilizados. El uso de dispositivos no aprobados por Kinedyne, tales como alguna barra de extensión o alguna otra herramienta para aumentar el apalancamiento en un trinquete omalacate, puede causar serios daños al operario o a cualquier persona alrededor. Las correas están diseñadas para ser utilizadas dentro de un rango de temperatura que va de los +194°F (+90°C) hasta -40°F (-40°C). Los conjuntos deben almacenarse fuera del sol directo y lejos de productos químicos dañinos cuando no esten en uso.Asegúrese de que la carga sea estable antes de apretar o liberar la tensión en un conjunto de correa.

Click on thumbnails to compare, click and drag images to reorder

4" by 40' Delta Ring Winch Strap

Fill out the form below

4-Inch x 40-Foot Delta Ring Winch Strap

4" by 40' Delta Ring Winch Strap – 424010 Quick Specs: