Kinedyne 4" x 35' Delta Ring Winch Strap

Kinedyne 4" by 35' Delta Ring Winch Strap

Product Code:

423510

UPC Code:

52474005739

Have Questions?

Fill out the form below

The Kinedyne 4" x 35' Delta Ring Winch Strap is what you use when you want an extra firm grasp on your cargo with a working load limit of 5,400 Lbs. / 2,450 Kgs. Our Delta Ring Winch Strap provides you with the high tension you need to keep your load in place.

4-Inch x 35-Foot Delta Ring Winch Strap

Engineered with the truck driver in mind, our 4-inch x 35-foot Delta Ring Winch Strap can handle an impressive working load limit of 5,400 Lbs. / 2,450 Kgs., so it's ready to keep your cargo secured and ready for transport.

The standard Kinedyne gold with black edge 4084F webbing is manufactured under our direct quality control with a tight polyester weave for optimal strength. In addition, moisture and ultraviolet rays will have little effect on the straps as the polyester is able to resist most weather conditions, whether it's a heat or a downpour.

A strong webbing like that needs an equally strong end fitting to help keep it tight across your cargo. That's where the Kinedyne 1026 Delta Ring comes into play. This heat-treated carbon steel end fitting can attach to nearly any hook on your vehicle for strong gripping power. It also withstands corrosion due to its zinc plated finish.

All Winch Straps have a tag that lists the Kinedyne name and logo and their working load limit, also stenciled on the straps, in accordance to CVSA, DOT regulations, WSTDA, CHP, and North American Cargo Securement standards. Note that load directions other than straight can result in a significant reduction in the working load limit.

4" by 35' Delta Ring Winch Strap – 423510 Quick Specs:

Working Load Limit: 5,400 Lbs. / 2,450 Kgs.
Width: 4 Inches
Length: 35 Feet
Weight: 5.81 Lbs. / 2.6 Kgs.
Webbing: Standard Kinedyne Gold with Black Edge 4084F Webbing
End Fitting: Kinedyne 1026 Delta Ring

Specifications

Breaking Strength - Assembly (lbs):	16200
End Fitting Material:	Heat Treated Carbon Steel
Breaking Strength - End Fittings (kgs):	9076
Breaking Strength - End Fittings (lbs):	20010
End Fitting Finish:	Zinc Plated
Country of Origin:	Canada/USA
Family:	Kinedyne Gold with Black Edge
Breaking Strength - Webbing (kgs):	9072
Breaking Strength - Webbing (lbs):	20000
Breaking Strength - Assembly (kgs):	7348
End Fitting Color:	Gold Dicromate
Color:	Kinedyne Gold with Black Edges
PROPOSITION 65:	No
Rating Tag:	Tyvek Tag marked with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations
Kinedyne K-Force Abrasion Coating:	False
Kinedyne Rhino Abrasion Coating:	False
Length (feet):	35
Specification Met:	WSTDA (web sling tie down association)
Sew Pattern:	Engineered to match webbing and hardware
Shipping Days:	3-5
VMRS Cargo Restraints:	055-012-014
Note for Breaking Strength (added as a warning 1):	notes-all-winch-strap-assembly-rating
Note for Breaking Strength (added as a warning 2):	notes-all-winch-strap-assembly-rating
Note for Breaking Strength (added as a warning 3):	notes-all-winch-strap-assembly-rating
Type of End Fitting:	Kinedyne 1026 Delta Ring
Warning Tag:	Trilingual (English, French and Spanish)
Webbing:	Kinedyne Gold with Black Edge 4080F Webbing
Webbing Material:	Polyester
Working Load Limit - Assembly (kgs):	2449
Webbing Strength (WSTDA) Indicator Line:	WSTDA (web sling tie down association) Capacity Indicator Line - 1 red line which represents 5000 Lbs. per inch across webbing
Working Load Limit - Assembly (lbs):	5400
Working Load Limit - End Fittings (kgs):	3025
Working Load Limit - End Fittings (lbs):	6670
Weight (kgs):	3
UPC Code:	52474005739
Weight (lbs):	5.8
Stencil Working Load Limit:	Stenciled with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations, every 30 inches
Working Load Limit - Webbing (kgs):	2994
Working Load Limit - Webbing (lbs):	6600
Width (inches):	4

Packaging

Skid - GTIN:	20052474005733
Skid - Standard Pack Quantity:	30
Skid - Unit Quantity:	300
Standard Pack - GTIN:	10052474005736
Standard Pack - Unit Quantity:	10
Unit Packaging:	Individually rolled and banded

Notices & Warnings

Warning English:	WARNING: Only trained, knowledgeable personnel should use tie-down straps. It is the operator’s responsibility to use appropriate type and number of straps for the load being secured. Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in a temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C). Straps should be stored out of direct sun and away from damaging chemicals when not in use. Ensure load is stable before tightening or releasing tension in a strap assembly.
Warning French:	AVERTISSEMENT : Seulement un personnel qualifié et instruit devrait se servir des courroies d’arrimage. Il est de la responsabilité de l’opérateur d’assurer l’utilisation du bon nombre et genre de courroie d’arrimage pour le type de cargaison étant sécurisée. Les courroies et sangles doivent être protégées lorsqu’elles sont utilisées sur des objets abrasifs ou coupants. Les courroies coupées, usées ou endommagées ne doivent pas être utilisées et doivent être remplacées immédiatement. Tout ensemble de courroie doit être inspecté avant chaque utilisation. L’utilisation d’une rallonge ou autre moyen d’accroître l’effet de levier d’une poignée à boucle à cliquet ou d’un treuil, autre qu’un outil approuvé par Kinedyne, peut causer des blessures graves à l’utilisateur ou un passant. Les courroies tissées sont calibrées pour des températures allant de + 194 degrés F (+90°C) à -40 degrés F (-40°C). Les sangles devraient être rangée hors du soleil et loin des produits chimiques nuisibles lorsqu’elles ne sont pas en utilisation.Assurez-vous que la cargaison est stable avant d’arrimer ou de relâcher la tension d’une courroie d’arrimage.
Warning Spanish:	ADVERTENCIA: Solo el personal entrenado y bien informado debe usar correas de amarre. Es responsabilidad del operador utilizar un tipo y numero de correas apropiados para la carga que se asegura. Las correas deben protegerse cuando se utilizan sobre objetos ásperos o cortantes. Las correas cortadas, desgastadas o dañadas no deben ser utilizadas y deben sustituirse inmediatamente.Todos los ensambles de correa deben inspeccionarse antes de ser utilizados. El uso de dispositivos no aprobados por Kinedyne, tales como alguna barra de extensión o alguna otra herramienta para aumentar el apalancamiento en un trinquete omalacate, puede causar serios daños al operario o a cualquier persona alrededor. Las correas están diseñadas para ser utilizadas dentro de un rango de temperatura que va de los +194°F (+90°C) hasta -40°F (-40°C). Los conjuntos deben almacenarse fuera del sol directo y lejos de productos químicos dañinos cuando no esten en uso.Asegúrese de que la carga sea estable antes de apretar o liberar la tensión en un conjunto de correa.

Click on thumbnails to compare, click and drag images to reorder

Kinedyne 4" by 35' Delta Ring Winch Strap

Fill out the form below

4-Inch x 35-Foot Delta Ring Winch Strap

4" by 35' Delta Ring Winch Strap – 423510 Quick Specs: