US Dollars
CA EN
MX ES
Kinedyne 4" by 30' K-FORCE™ Flat Hook Ratchet Strap
Have Questions?
Fill out the form below
Kinedyne provides the most efficient solutions to your cargo control problems by offering the highest quality products in the industry, and the 4" x 30' K-FORCE Flat Hook Ratchet Strap is no exception. The K-FORCE Flat Hook Ratchet Strap's 6,670 Lbs. / 3,025 Kgs. working load limit is ready for nearly any tie down job you can throw at it.
4-Inch x 30-Foot K-FORCE Flat Hook Ratchet Strap
Do you look on the back of your flatbed and get tired of seeing frayed straps, corroded ratchets, and unsafe cargo? If this is the case, then it's about time to invest in our high-quality Ratchet Straps, especially our 4-inch x 30-foot K-FORCE Flat Hook Ratchet Strap that has an impressive working load limit of 6,670 Lbs. / 3,025 Kgs.
With a fixed end length of 18" and a weight of 13.11 Lbs. / 5.9 Kgs., this 4" by 30' K-FORCE Ratchet Strap is equipped with Kinedyne 1028 Flat Hooks with Abrasion Clip fixed end fittings to help tighten down your load. No more unsecured cargo on your flatbed.
Made under direct Kinedyne quality control, our sew pattern is engineered to match the industrial strength of our K-FORCE orange 4054XW polyester webbing with the comfortable grip of our Kinedyne 808 long handle ratchet for easy tensioning and securement.
To comply with WSTDA, CVSA, CHP, DOT regulations, and North American Cargo Securement standards, our Ratchet Straps are stenciled with the manufacturer's name and the working load limit.
4" by 30' K-FORCE Flat Hook Ratchet Strap – 9430D3 Quick Specs:
- Working Load Limit: 6,670 Lbs. / 3,025 Kgs.
- Width: 4 Inches
- Length: 30 Feet
- Weight: 13.11 Lbs. / 5.9 Kgs.
- Webbing: Kinedyne K-FORCE Orange 4054XW Webbing
- Fixed End Length: 18 Inches
- Type of Tension Device: Kinedyne 808 Long Handle Ratchet
- End Fitting: Kinedyne 1028 Flat Hook with Abrasion Clip