Kinedyne 4" by 30' Delta Ring Winch Strap

4-Inch x 30-Foot Delta Ring Winch Strap

Have you noticed any holes in your old Winch Straps? Any tears, stains, burn hole, abrasive wear, or loose ends? If it has even a minuscule rip in its webbing, your strap is too dangerous to continue using. It's time to get a new one, and it just so happens that our 4-inch x 30-foot Delta Ring Winch Strap is all ready and waiting for you. Able to handle a working load limit of 5,400 Lbs. / 2,450 Kgs., our Delta Ring Winch Strap was designed to handle the heavier loads with ease.

Slip the heat-treated carbon steel Kinedyne 1026 Delta Ring end fitting into nearly any hook on your trailer or vehicle and give it a tug. You'll feel the underlying strength of our gold dichromate Delta Ring as it refuses to give under the pressure, even when faced with 5,400 Lbs. / 2,450 Kgs.

In your hands, you'll also feel the smooth versatility of the Kinedyne gold with black edge 4084F webbing. Twisting won't leave wrinkles and pulling won't leave it stretched out. Even when faced with severe weather conditions, our polyester webbing refuses to back down from the job, offering you reliable support with your cargo tie down requirements.

All Kinedyne Winch Straps are labeled with their working load limit on their tags (in French and English) and stenciled on the straps in compliance with CHP, WSTDA, North American Cargo Securement Standards, CVSA, and DOT regulations. The Capacity Indicator Line designates that one red line represents 5,000 pounds per inch across webbing.

4" by 30' Delta Ring Winch Strap – 423010 Quick Specs:

• Working Load Limit: 5,400 Lbs. / 2,450 Kgs.
• Width: 4 Inches
• Length: 30 Feet
• Weight: 5.49 Lbs. / 2.5 Kgs.
• Webbing: Standard Kinedyne Gold with Black Edge 4084F Webbing
• End Fitting: Kinedyne 1026 Delta Ring