Kinedyne 3" x 27' Flat Hook Ratchet Strap

3" by 27' Flat Hook Ratchet Strap

Product Code:

552721

UPC Code:

52474002936

Have Questions?

Fill out the form below

When you combine Kinedyne's comfortable heat-treated carbon steel long handle ratchet with its durable polyester webbing, you get the 3" x 27' Flat Hook Ratchet Strap. For anyone looking for reliable straps with a 5,400 Lbs. / 2,450 Kgs. working load limit, then you've found exactly what you're looking for.

3-Inch x 27-Foot Flat Hook Ratchet Strap

The large mandrel easily accommodates the 3-inch wide polyester webbing for nearly any securement application. With a substantial 5,400 Lbs. / 2,450 Kgs. working load limit, these 3-inch x 27-foot straps just beg to be used. Made with our polyester webbing, these durable straps are built to last since they don't stretch as much as nylon or polypropylene, offering peace of mind.

Kinedyne, which assumes direct control over quality manufacturing, uses an engineered sew pattern to complement this type of webbing to the tensioning device as well as the Flat Hook fittings.

Flat Hooks are some of the more commonly used fittings for a flatbed Ratchet Tie Down Strap since they can be attached quickly and effectively. Our Kinedyne 1021 Flat Hooks with Abrasion Clip are no exception as they are engineered for maximum strength and efficiency to reduce the time it takes to get your load secured.

Kinedyne Flat Hook Ratchet Straps are standard labeled with the manufacturer's name and working load limit on the tags and the straps in accordance to North American Regulations.

3" by 27' Flat Hook Ratchet Strap – 552721 Quick Specs:

Working Load Limit: 5,400 Lbs. / 2,450 Kgs.
Width: 3 Inches
Length: 27 Feet
Weight: 12.4 Lbs. / 5.6 Kgs.
Webbing: Standard Kinedyne Gold with Black Edge 3084F Webbing
Fixed End Length: 18 Inches
Type of Tension Device: Kinedyne 806 Long Handle Ratchet
End Fitting: Kinedyne 1021 Flat Hook with Abrasion Clip

Specifications

Breaking Strength - Assembly (lbs):	16200
End Fittings Color:	Black
End Fittings Finish:	Powder Coat
End Fittings Material:	Heat Treated Carbon Steel
Country of Origin:	China/Canada
Family:	Kinedyne Gold with Black Edge
Fixed End Length (inches):	18
Color:	Kinedyne Gold with Black Edges
PROPOSITION 65:	No
Rating Tag:	Tyvek Tag marked with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations
Kinedyne K-Force Abrasion Coating:	False
Kinedyne Rhino Abrasion Coating:	False
Length (feet):	27
Specification Met:	WSTDA (web sling tie down association)
Sew Pattern:	Engineered to match webbing and hardware
Shipping Days:	3-5
VMRS Cargo Restraints:	055-012-010
Note for Breaking Strength (added as a warning 1):	notes-all-rachet-strap-assembly-rating
Tension Device Finish:	Zinc Plated
Note for Breaking Strength (added as a warning 2):	notes-all-rachet-strap-assembly-rating
Tension Device used with what size webbing:	3
Note for Breaking Strength (added as a warning 3):	notes-all-rachet-strap-assembly-rating
Tensioning Device Color:	Gold Dicromate
Note for Breaking Strength (added as a warning 4):	notes-all-rachet-strap-assembly-rating
Tensioning Device Material:	Heat Treated Carbon Steel
Type of End Fittings:	Kinedyne 1021 Flat Hook with Abrasion Clip
Warning Tag:	Trilingual (English, French and Spanish)
Webbing:	Kinedyne Gold with Black Edge 3084F Webbing
Webbing Material:	Polyester
Working Load Limit - Assembly (kgs):	2449
Working Load Limit - Assembly (lbs):	5400
Type of Tension Device:	Kinedyne 806 long Handle Ratchet
Weight (kgs):	6
UPC Code:	52474002936
Weight (lbs):	12.4
Stencil Working Load Limit:	Stenciled with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations, every 30 inches
Width (inches):	3
WSTDA Indicator Line:	WSTDA (web sling tie down association) Capacity Indicator Line - 2 red line which represents 6000 Lbs. per inch across webbing

Packaging

Skid - GTIN:	20052474002930
Skid - Standard Pack Quantity:	60
Skid - Unit Quantity:	240
Standard Pack - GTIN:	10052474002933
Standard Pack - Unit Quantity:	4
Unit Packaging:	Individually rolled and banded

Notices & Warnings

Warning English:	WARNING: Only trained, knowledgeable personnel should use tie-down straps. It is the operator’s responsibility to use appropriate type and number of straps for the load being secured. Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in a temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C). Straps should be stored out of direct sun and away from damaging chemicals when not in use. Ensure load is stable before tightening or releasing tension in a strap assembly.
Warning French:	AVERTISSEMENT : Seulement un personnel qualifié et instruit devrait se servir des courroies d’arrimage. Il est de la responsabilité de l’opérateur d’assurer l’utilisation du bon nombre et genre de courroie d’arrimage pour le type de cargaison étant sécurisée. Les courroies et sangles doivent être protégées lorsqu’elles sont utilisées sur des objets abrasifs ou coupants. Les courroies coupées, usées ou endommagées ne doivent pas être utilisées et doivent être remplacées immédiatement. Tout ensemble de courroie doit être inspecté avant chaque utilisation. L’utilisation d’une rallonge ou autre moyen d’accroître l’effet de levier d’une poignée à boucle à cliquet ou d’un treuil, autre qu’un outil approuvé par Kinedyne, peut causer des blessures graves à l’utilisateur ou un passant. Les courroies tissées sont calibrées pour des températures allant de + 194 degrés F (+90°C) à -40 degrés F (-40°C). Les sangles devraient être rangée hors du soleil et loin des produits chimiques nuisibles lorsqu’elles ne sont pas en utilisation.Assurez-vous que la cargaison est stable avant d’arrimer ou de relâcher la tension d’une courroie d’arrimage.
Warning Spanish:	ADVERTENCIA: Solo el personal entrenado y bien informado debe usar correas de amarre. Es responsabilidad del operador utilizar un tipo y numero de correas apropiados para la carga que se asegura. Las correas deben protegerse cuando se utilizan sobre objetos ásperos o cortantes. Las correas cortadas, desgastadas o dañadas no deben ser utilizadas y deben sustituirse inmediatamente.Todos los ensambles de correa deben inspeccionarse antes de ser utilizados. El uso de dispositivos no aprobados por Kinedyne, tales como alguna barra de extensión o alguna otra herramienta para aumentar el apalancamiento en un trinquete omalacate, puede causar serios daños al operario o a cualquier persona alrededor. Las correas están diseñadas para ser utilizadas dentro de un rango de temperatura que va de los +194°F (+90°C) hasta -40°F (-40°C). Los conjuntos deben almacenarse fuera del sol directo y lejos de productos químicos dañinos cuando no esten en uso.Asegúrese de que la carga sea estable antes de apretar o liberar la tensión en un conjunto de correa.

Click on thumbnails to compare, click and drag images to reorder

3" by 27' Flat Hook Ratchet Strap

Fill out the form below

3-Inch x 27-Foot Flat Hook Ratchet Strap

3" by 27' Flat Hook Ratchet Strap – 552721 Quick Specs: