Kinedyne 2" by 30' K-FORCE™ Chain Anchor Ratchet Strap

2-Inch x 30-Foot K-FORCE Chain Anchor Ratchet Strap

Kinedyne has gone beyond good to give you something better, and that's our 2-inch x 30' K-FORCE Chain Anchor Ratchet Strap with a working load limit of 4,000 Lbs. / 1,814 Kgs. The 2-inch polyester webbing comes attached with 18-inch long Kinedyne 80181 Chain Anchors with gold dichromate heat-treated carbon steel 3/8-inch grab hook fittings on the ends of the strap. This allows for strength and flexibility, ensuring that both sides are tight enough to handle your load.

The 30' strap is easily adjustable to give you the flexibility you need to handle those larger heavy-duty loads. The length of the Kinedyne K-FORCE orange 2054XW webbing gives you enough webbing to get the job done quickly. This tie down comes equipped with a Kinedyne 804 wide handle ratchet made of heat-treated carbon steel with a zinc plated finish to offer protection against corrosion. Our built-to-last ratchet lets you maintain maximum tension on the strap to securely tighten your load throughout its journey.

Kinedyne Ratchet Straps are labeled with their working load limit on their tags and stenciled on the straps according to DOT regulations, CHP, WSTDA, CVSA, and North American Cargo Securement standards.

2" by 30' K-FORCE Chain Anchor Ratchet Strap – 9230D5 Quick Specs:

• Working Load Limit: 4,000 Lbs. / 1,814 Kgs.
• Width: 2 Inches
• Length: 30 Feet
• Weight: 11.07 Lbs. / 5.0 Kgs.
• Webbing: Kinedyne K-FORCE Orange 2054XW Webbing
• Fixed End Length: 18 Inches
• Type of Tension Device: Kinedyne 804 Wide Handle Ratchet
• End Fitting: Kinedyne 80181 Chain Anchor – 18 Inches