Kinedyne 2" by 30' Chain Anchor Winch Strap

2-Inch x 30-Foot Chain Anchor Winch Strap

Notice any holes or tears, excessive abrasion wear, or worn stitching on your current Winch Strap? With that kind of damage, it's too dangerous to use, so it's time to toss it out and replace it with your own Kinedyne 2-inch x 30-foot Chain Anchor Winch Strap. This 4.7 Lbs. / 2.1 Kgs. strap features a working load limit of 3,335 Lbs. / 1,151 Kgs., so it's ready to take on your heavy-duty tie down jobs.

You can easily feed the 30 feet of our standard Kinedyne gold with black edge 2084F webbing into the sliding winch or the mounted winch that's been welded or bolted onto your vehicle. You can then soundly tighten the polyester webbing over your load for a secure tie down job.

While impressively strong, the industrial strength of the polyester webbing only increases with the durability of the heat-treated carbon steel Grade 43 Kinedyne 3705-2 Chain Anchor end fittings. Coated in a zinc plated finish, the gold dichromate 5/16-inch grab hooks can be reliably secured to most anchor points, such as D-rings, and stake pockets.

All of our Winch Straps meet WSTDA, CHP, DOT, CVSA, and North American Cargo Securement standards and have their working load limit and the Kinedyne name and logo printed clearly on the tag and stenciled on the straps every 30 inches.

2" by 30' Chain Anchor Winch Strap – 223039 Quick Specs:

• Working Load Limit: 3,335 Lbs. / 1,515 Kgs.
• Width: 2 Inches
• Length: 30 Feet
• Weight: 4.7 Lbs. / 2.1 Kgs.
• Webbing: Standard Kinedyne Gold with Black Edge 2084F Webbing
• End Fitting: Kinedyne 3705-2 Chain Anchor