2" by 27' K-FORCE™ Flat Hook Ratchet Strap

2-Inch x 27-Foot K-FORCE Flat Hook Ratchet Strap

Kinedyne's 2-inch x 27-foot K-FORCE Flat Hook Ratchet Strap is manufactured to take on the heavier loads with its working load limit of 4,000 Lbs. / 1,814 Kgs. With a standard 18" fixed end length and a weight of 6.46 Lbs. / 2.9 Kgs., this Ratchet Strap is maneuverable and transportable, so it can be easily utilized for a wide array of securement scenarios.

The 2" by 27' K-FORCE Flat Hook Ratchet Strap provides an easy, fast way to tie down your cargo. Our gold dichromate heat-treated carbon steel Kinedyne 804 wide handle ratchet allows you to tension your valuable load, locking it in place to prevent any accidents. No more stopping every few miles to check to make sure your load is just as tight as you left it.

With direct control over quality manufacturing, Kinedyne uses an engineered sew pattern that matches the strength of the K-FORCE orange 2054XW polyester webbing to the durability of the heat-treated carbon steel ratchet and Kinedyne FE7915-1 Flat Hook end fittings for a Ratchet Strap combination that is sure to smoothly and securely get the job done.

All Kinedyne-manufactured Ratchet Straps are labeled and with our name and the working load limit in accordance to CVSA, WSTDA, North American Cargo Securement Standards, CHP, and DOT regulations.

2" by 27' K-FORCE Flat Hook Ratchet Strap – 922723 Quick Specs:

• Working Load Limit: 4,000 Lbs. / 1,814 Kgs.
• Width: 2 Inches
• Length: 27 Feet
• Weight: 6.45 Lbs. / 2.9 Kgs.
• Webbing: Kinedyne K-FORCE Orange 2054XW Webbing
• Fixed End Length: 18 Inches
• Type of Tension Device: Kinedyne 804 Wide Handle Ratchet
• End Fitting: Kinedyne FE7915-1 Flat Hook