Kinedyne Pair 2" x 12" Snap Ratchet Marine Transom Straps

Kinedyne Pair of 2" by 12' Snap Hook Ratchet Marine Transom Straps

Product Code:

15529

UPC Code:

52474014601

Have Questions?

Fill out the form below

With a working load limit of 3,335 Lbs. / 1,513 Kgs. and the length adjustability of 22-inches to 144-inches, our 2-inch wide Ratchet Buckle Marine Transom Strap with Snap Hook is ideal for the big boat applications. This Strap is designed to be used for both stern and freeboard applications.

Pair of 2-Inch x 12-Foot Snap Hook Ratchet Marine Transom Straps

Got a big boat? You're gonna need a bigger tie down strap. To help you secure the stern of your big boat when your transporting it, we're offering a pair of our 2-Inch wide Ratchet Buckle Marine Transom Strap with Snap Hook. These transom straps not only come with a working load limit of 3,335 Lbs. / 1,513 Kgs but also the length adjustability of 22-inches to 144-inches. What sets this Transom Strap apart is its twisted feature. In big boat applications, it evenly distributes the load over the trailer's welded U Hooks without the Strap twisting. You can use our Strap for stern and freeboard applications.

We've engineered our Strap with the same kind of strength truckers use to haul their cargo. To help you get your boat to the water quicker, we've equipped our Transom Strap with a pair of industrial strength heat-treated carbon steel Snap Hooks. These positive locking 2" twisted zinc plated military hooks do not come loose from the trailer or the boat's anchor points while in transit, making them the secure choice.

The heat-treated carbon steel Kinedyne 804 Ratchet is a good addition for the big guns since this type of Ratchet is typically used for cargo type tensioning, meaning it's been built for securement. Easy to use with a comfortable wide grip, our Ratchet offers superior tensioning of our Kinedyne grey 2084G polyester webbing. A convenient gel coat protector is held in place with a Velcro guide so that it doesn't shift around during transit as it prevents the Ratchet from marring the boat's finish. The protector also allows easy storage of excess webbing.

Pair of 2" by 12' Snap Hook Ratchet Marine Transom Straps – 15529 Quick Specs:

Working Load Limit: 3,335 Lbs. / 1,513 Kgs.
Width: 2 Inches
Length: 12 Feet
Weight: 11 Lbs. / 5.0 Kgs.
Webbing: Kinedyne Grey 2084G Webbing
Type of Tension Device: Kinedyne 804 Ratchet
Type of End Fitting: Kinedyne Snap Hook

Specifications

Breaking Strength - Assembly (lbs):	10005
End Fittings Color:	Gold Dichromate
End Fittings Material:	Heat Treated Carbon Steel
Country of Origin:	China
Breaking Strength - Tensioning Device (kgs):	5443
Breaking Strength - Tensioning Device (lbs):	12000
Family:	STEADYMATE
Built-in Gel Coat Protector:	True
Built-in Gel Coat Protector Description:	Comes standard with a removable Gel Coat Protector to prevent the tensioning device or end fitting from scratching the gel coat
Breaking Strength - Assembly (kgs):	4538
Color:	Grey
PROPOSITION 65:	No
Rating Tag:	Tyvek Tag marked with Manufacturers me, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations
Length (feet):	12
Specification Met:	WSTDA (web sling tie down association)
Sew Pattern:	Engineered to match webbing and hardware
Shipping Days:	3-5
Note for Breaking Strength (added as a warning 1):	notes-all-rachet-strap-assembly-rating
Tension Device Finish:	Zinc Plated
Note for Breaking Strength (added as a warning 2):	notes-all-rachet-strap-assembly-rating
Tension Device used with what size webbing:	2
Note for Breaking Strength (added as a warning 3):	notes-all-rachet-strap-assembly-rating
Tensioning Device Color:	Gold Dichromate
Tensioning Device Material:	Heat Treated Carbon Steel
Type of End Fittings:	Kinedyne Sp Hook
Warning Tag:	Trilingual (English, French and Spanish)
Webbing:	Kinedyne Grey 2084G Webbing
Webbing Material:	Polyester
Working Load Limit - Assembly (kgs):	1513
Working Load Limit - Assembly (lbs):	3335
Type of Tension Device:	Kinedyne 804 Ratchet
Weight (kgs):	5
UPC Code:	52474014601
Weight (lbs):	11
Working Load Limit - Tensioning Device (kgs):	1814
Working Load Limit - Tensioning Device (lbs):	4000
Width (inches):	2

Packaging

Skid - Standard Pack Quantity:	15
Skid - Unit Quantity:	60
Standard Pack - Unit Quantity:	4
Unit Packaging:	2 per box

Notices & Warnings

Warning English:	WARNING: Only trained, knowledgeable personnel should use tie-down straps. It is the operator’s responsibility to use appropriate type and number of straps for the load being secured. Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in a temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C). Straps should be stored out of direct sun and away from damaging chemicals when not in use. Ensure load is stable before tightening or releasing tension in a strap assembly.
Warning French:	AVERTISSEMENT : Seulement un personnel qualifié et instruit devrait se servir des courroies d’arrimage. Il est de la responsabilité de l’opérateur d’assurer l’utilisation du bon nombre et genre de courroie d’arrimage pour le type de cargaison étant sécurisée. Les courroies et sangles doivent être protégées lorsqu’elles sont utilisées sur des objets abrasifs ou coupants. Les courroies coupées, usées ou endommagées ne doivent pas être utilisées et doivent être remplacées immédiatement. Tout ensemble de courroie doit être inspecté avant chaque utilisation. L’utilisation d’une rallonge ou autre moyen d’accroître l’effet de levier d’une poignée à boucle à cliquet ou d’un treuil, autre qu’un outil approuvé par Kinedyne, peut causer des blessures graves à l’utilisateur ou un passant. Les courroies tissées sont calibrées pour des températures allant de + 194 degrés F (+90°C) à -40 degrés F (-40°C). Les sangles devraient être rangée hors du soleil et loin des produits chimiques nuisibles lorsqu’elles ne sont pas en utilisation.Assurez-vous que la cargaison est stable avant d’arrimer ou de relâcher la tension d’une courroie d’arrimage.
Warning Spanish:	ADVERTENCIA: Solo el personal entrenado y bien informado debe usar correas de amarre. Es responsabilidad del operador utilizar un tipo y numero de correas apropiados para la carga que se asegura. Las correas deben protegerse cuando se utilizan sobre objetos ásperos o cortantes. Las correas cortadas, desgastadas o dañadas no deben ser utilizadas y deben sustituirse inmediatamente.Todos los ensambles de correa deben inspeccionarse antes de ser utilizados. El uso de dispositivos no aprobados por Kinedyne, tales como alguna barra de extensión o alguna otra herramienta para aumentar el apalancamiento en un trinquete omalacate, puede causar serios daños al operario o a cualquier persona alrededor. Las correas están diseñadas para ser utilizadas dentro de un rango de temperatura que va de los +194°F (+90°C) hasta -40°F (-40°C). Los conjuntos deben almacenarse fuera del sol directo y lejos de productos químicos dañinos cuando no esten en uso.Asegúrese de que la carga sea estable antes de apretar o liberar la tensión en un conjunto de correa.

Click on thumbnails to compare, click and drag images to reorder

Kinedyne Pair of 2" by 12' Snap Hook Ratchet Marine Transom Straps

Fill out the form below

Pair of 2-Inch x 12-Foot Snap Hook Ratchet Marine Transom Straps

Pair of 2" by 12' Snap Hook Ratchet Marine Transom Straps – 15529 Quick Specs: